Exclusief btw. Btw en verzendkosten berekend bij het afrekenen
12V jump starting · 10,000mAh / 37Wh
1,000A starting current, 2,000A peak current, PD18W recharging and a 5W emergency light, with a clear status display.
Multi-pack savings
2 or more units save 3%, 3 or more save 6%, and 4 or more save 9%. Checkout shows the final eligible price.
Btw en verzendkosten berekend bij het afrekenen
Product film
Fifty seconds, start to finish: the U32 comes out of the glovebox, the clamps go on the battery, and the car drives off. You also see the 100% charge display, the emergency LED and two devices charging from the USB ports.
U32 FEATURES
Original A+ visuals carry the product story; the page adds a consistent reading order, confirmed specifications and the operating context that matters.
U32 overview
U32 brings emergency starting, device power and a practical roadside light together. The original product information keeps 10,000mAh / 37Wh, 2,000A peak and 1,000A starting current visible at a glance.
Verified essentials
U32 is specified at 150 × 75 × 25mm and 480g, with ABS+PC housing, PD 18W Type-C recharging and a 5W emergency light. See the full Specifications panel for port limits and safe-use guidance.
Starting performance
The documented engine reference is up to 6.5L Gas or 3.5L Diesel. The 30+ starts reference is based on an internal 1.6L test vehicle at 23°C; battery health, temperature and vehicle condition affect results.
Smart clamp guidance
The EC5 smart clamp uses a heavy-duty 10AWG cable with buzzer and status guidance. Confirm the connection, wait for the green indication and follow the four-step sequence in the manual.
All-season readiness
U32 has a documented operating temperature range of -20°C–60°C. Keep the unit clean and dry, and do not rinse or use it as a waterproof device.
Stored energy
The 10,000mAh / 37Wh battery supports repeated roadside readiness and everyday USB device power. Recharge after use and at least once every three months during long-term storage.
Six visible safeguards
The original six-in-one protection graphic is retained: reverse polarity, short circuit, over-voltage, over-current, overheat and over-discharge. Product safety documentation for U32, including the UL 2743 test-report scope, is listed under Safety & Compliance.
Ready where you park
Keep U32 accessible for commutes, road trips, outdoor weekends and low-battery moments. Inspect the clamps before use and always work with a compatible 12V vehicle battery.
Emergency light
The 5W LED has Steady, Flashing and SOS modes. Hold the power key for two seconds or double-click to turn the light on or off, then short-press to cycle modes.
Four-step start
Charge U32 to at least 50%, insert the EC5 smart clamp, connect red to positive and black to negative, then start within 30 seconds after the clamp shows green. Disconnect once the vehicle has started.
Product details
Confirmed values are drawn from the U32 English manual, approved A+ materials and the documented start-count test. Follow the manual’s operating sequence and safety limits before every use.
What is included
Reference material
U32 JUMP STARTER
Use the U32 guide for the documented vehicle-starting sequence, charging and clamp safety checks.
Use only documents that match the product label. Public technical documents are available from the product page or technology center where shown.
U32 SUPPORT
U32 is for compatible 12V vehicles, with a stated reference of up to 6.5L gasoline or 3.5L diesel engines. Confirm the vehicle, battery condition and manual before use.
The 30+ start reference is based on a 1.6L test vehicle at 23°C. Actual results vary with vehicle type, battery health, engine condition and temperature.
Recharge U32 through Type-C at 5V/2A or 9V/2A PD 18W. The two USB-A ports support everyday device charging with a shared 5V/2.4A total maximum output.
The 5W emergency light has Steady, Flashing and SOS modes. Hold the power key for two seconds or double-click to turn it on or off, then short-press to cycle modes.
The original 6-in-1 protection graphic shows reverse polarity, short circuit, over-voltage, over-current, overheat and over-discharge safeguards. Always confirm the clamp’s green indication before starting.
No. U32 is not waterproof. Keep the unit, clamp and ports dry; do not submerge or rinse the product.
The smart clamp checks the vehicle battery before it sends power. If it reads below our protective threshold — 10.5V ±0.3V as specified for this clamp — the clamp will not output: you will see the red light and hear the buzzer instead of a steady green light. That is the protection working, not a fault. Charge the battery first, or connect another vehicle for a few minutes to lift the voltage; U32 then works normally.
We deliberately did not add a Boost or Force Start button. Overriding this protection also disables reverse-polarity and short-circuit protection, and forcing sustained current past the clamp rating can heat the jaws enough to weld them to the battery terminal.
Five years from the delivery date, against manufacturing defects and failure under normal use. If it fails, email info@suntneew.com with your order number and we will repair or replace it. See the full warranty terms.
