Configuratiereferentie lezen
WL10B 10.24kWh Low-Voltage Home Battery
Use this guide for the published configuration data, the installation prerequisites and the monitoring interfaces of WL10B.
Hier zijn geen passende installatiehandleidingen, certificaten, UN38.3-rapporten of veiligheidsbladen voor het exacte model gepubliceerd. Laat vóór bestellen de batterij/omvormerconfiguratie, beschikbare documenten en Amerikaanse postcode door support controleren. Dit overzicht vervangt geen installatiehandleiding; installeer pas nadat uw installateur de vereiste instructies heeft beoordeeld.Configuration data
Cell chemistry: LFP
Rated voltage: 51.2V
Rated capacity: 200Ah / 10.24kWh
Max charging voltage: 57.6V
Overdischarge voltage: 44.8V
Max / peak charging current: 150A / 190A
Max / peak discharging current: 200A / 220A
Cycle life: 5,000 cycles
Weight: 88kg
Dimensions (H × W × D): 1165 × 525 × 170mm
Enclosure rating: IP54
Installation: wall mounting or floor standing
Communication interfaces include CAN, RS485, Wi-Fi and Bluetooth for monitoring through the battery or inverter interface.
Before installation
- Review the inverter communication and electrical specifications before installation.
- Confirm the delivery destination and any local receiving requirements.
- Use a qualified installer and follow local electrical requirements.
- Confirm that the mounting surface, clearance and cable routing suit the selected wall or floor position; WL10B is heavier than WL5A and needs suitable fixing.
Monitoring and communication
WL10B communicates over CAN and RS485 with the inverter or system controller, and additionally lists Wi-Fi and Bluetooth for monitoring. Up to nine sets can be connected in one system; confirm the exact configuration with your installer before purchase.
Safety and handling
- Installation and wiring must be carried out by a qualified installer.
- Verify polarity and torque all connections before commissioning.
- Keep the battery away from water, heat sources, sparks and open flames.
- Do not open, modify or repair the battery enclosure.
- Do not connect loads or chargers outside the ratings listed above.
- Follow local electrical code for breakers, fuses and disconnects.
Documents and certification status
Hier zijn geen passende installatiehandleidingen, certificaten, UN38.3-rapporten of veiligheidsbladen voor het exacte model gepubliceerd. Laat vóór bestellen de batterij/omvormerconfiguratie, beschikbare documenten en Amerikaanse postcode door support controleren. Dit overzicht vervangt geen installatiehandleiding; installeer pas nadat uw installateur de vereiste instructies heeft beoordeeld.