WL10B Support & Documents

Cell chemistry: LFP
Rated voltage: 51.2V
Rated capacity: 200Ah / 10.24kWh
Max charging voltage: 57.6V
Overdischarge voltage: 44.8V
Max / peak charging current: 150A / 190A
Max / peak discharging current: 200A / 220A
Cycle life: 5,000 cycles
Weight: 88kg
Dimensions (H × W × D): 1165 × 525 × 170mm
Enclosure rating: IP54
Installation: wall mounting or floor standing

Communication interfaces include CAN, RS485, Wi-Fi and Bluetooth for monitoring through the battery or inverter interface.

1. Review the inverter communication and electrical specifications before installation.
2. Confirm the delivery destination and any local receiving requirements.
3. Use a qualified installer and follow local electrical requirements.
4. Confirm that the mounting surface, clearance and cable routing suit the selected wall or floor position; WL10B is heavier than WL5A and needs suitable fixing.

WL10B communicates over CAN and RS485 with the inverter or system controller, and additionally lists Wi-Fi and Bluetooth for monitoring. Up to nine sets can be connected in one system; confirm the exact configuration with your installer before purchase.

1. Installation and wiring must be carried out by a qualified installer.
2. Verify polarity and torque all connections before commissioning.
3. Keep the battery away from water, heat sources, sparks and open flames.
4. Do not open, modify or repair the battery enclosure.
5. Do not connect loads or chargers outside the ratings listed above.
6. Follow local electrical code for breakers, fuses and disconnects.

Qui non sono pubblicati manuali di installazione, certificati, rapporti UN38.3 o schede di sicurezza relativi al modello esatto. Prima di ordinare, chiedi al supporto di verificare la configurazione batteria/inverter, i documenti disponibili e il CAP di consegna negli USA. Questa scheda non sostituisce il manuale; installa solo dopo la verifica delle istruzioni necessarie da parte dell’installatore.