WL5A Support & Documents

Cell chemistry: LFP
Rated voltage: 51.2V
Rated capacity: 100Ah / 5.12kWh
Max charging voltage: 57.6V
Overdischarge voltage: 44.8V
Max / peak charging current: 90A / 95A
Max / peak discharging current: 100A / 110A
Cycle life: 5,000 cycles
Weight: 52kg
Dimensions (H × W × D): 645 × 525 × 170mm
Enclosure rating: IP54
Installation: wall mounting or floor standing

Communication interfaces include CAN, RS485, Wi-Fi and Bluetooth for monitoring through the battery or inverter interface.

1. Review the inverter communication and electrical specifications before installation.
2. Confirm the delivery destination and any local receiving requirements.
3. Use a qualified installer and follow local electrical requirements.
4. Confirm that the mounting surface, clearance and cable routing suit the selected wall or floor position.

WL5A communicates over CAN and RS485 with the inverter or system controller, and additionally lists Wi-Fi and Bluetooth for monitoring. Up to nine sets can be connected in one system; confirm the exact configuration with your installer before purchase.

1. Installation and wiring must be carried out by a qualified installer.
2. Verify polarity and torque all connections before commissioning.
3. Keep the battery away from water, heat sources, sparks and open flames.
4. Do not open, modify or repair the battery enclosure.
5. Do not connect loads or chargers outside the ratings listed above.
6. Follow local electrical code for breakers, fuses and disconnects.

該当モデルの設置マニュアル、認証書、UN38.3報告書、安全データシートはここでは公開されていません。ご注文前に、バッテリー／インバーター構成、提供可能な資料、米国配送先の郵便番号をサポートにご確認ください。この概要は設置マニュアルの代わりにはなりません。必要な指示を施工担当者が確認するまで設置しないでください。