構成情報を読む
WL10B 10.24kWh Low-Voltage Home Battery
Use this guide for the published configuration data, the installation prerequisites and the monitoring interfaces of WL10B.
該当モデルの設置マニュアル、認証書、UN38.3報告書、安全データシートはここでは公開されていません。ご注文前に、バッテリー／インバーター構成、提供可能な資料、米国配送先の郵便番号をサポートにご確認ください。この概要は設置マニュアルの代わりにはなりません。必要な指示を施工担当者が確認するまで設置しないでください。Configuration data
Cell chemistry: LFP
Rated voltage: 51.2V
Rated capacity: 200Ah / 10.24kWh
Max charging voltage: 57.6V
Overdischarge voltage: 44.8V
Max / peak charging current: 150A / 190A
Max / peak discharging current: 200A / 220A
Cycle life: 5,000 cycles
Weight: 88kg
Dimensions (H × W × D): 1165 × 525 × 170mm
Enclosure rating: IP54
Installation: wall mounting or floor standing
Communication interfaces include CAN, RS485, Wi-Fi and Bluetooth for monitoring through the battery or inverter interface.
Before installation
- Review the inverter communication and electrical specifications before installation.
- Confirm the delivery destination and any local receiving requirements.
- Use a qualified installer and follow local electrical requirements.
- Confirm that the mounting surface, clearance and cable routing suit the selected wall or floor position; WL10B is heavier than WL5A and needs suitable fixing.
Monitoring and communication
WL10B communicates over CAN and RS485 with the inverter or system controller, and additionally lists Wi-Fi and Bluetooth for monitoring. Up to nine sets can be connected in one system; confirm the exact configuration with your installer before purchase.
Safety and handling
- Installation and wiring must be carried out by a qualified installer.
- Verify polarity and torque all connections before commissioning.
- Keep the battery away from water, heat sources, sparks and open flames.
- Do not open, modify or repair the battery enclosure.
- Do not connect loads or chargers outside the ratings listed above.
- Follow local electrical code for breakers, fuses and disconnects.
Documents and certification status
該当モデルの設置マニュアル、認証書、UN38.3報告書、安全データシートはここでは公開されていません。ご注文前に、バッテリー／インバーター構成、提供可能な資料、米国配送先の郵便番号をサポートにご確認ください。この概要は設置マニュアルの代わりにはなりません。必要な指示を施工担当者が確認するまで設置しないでください。